|
 |
 |
|
| DAMP
PROOFING, WATER PROOFING & ANIT-GRAFITTI |
|
 |
|
| |
|
|
| System
17-X
- Ultimate Damproofing Barrier |
| Unlike
asphalt base products which coat the surface of the foundation,
the special formulation of System 17-X penetrates the
surface, forming a mechanical bond stronger than the
concrete
itself. Tests conducted in accordance with ASTM D 4541-93
show the bond strength of System 17-X is so great, the
concrete surface failed before the System 17-X pulled
off. The smaller
sample showed no peeling, blistering or bubbles even
after being boiled in water per ASTM 579-81. |
Exterior
Dampproofing:
System 17-X is an exciting, new, high quality dampproofing,
designed to replace the asphalt coatings and poly film
now used in construction. Manufactured from recycled
plastic resin*, it forms an epoxy-like seal which bonds
directly to masonry or poured concrete. The result is
a durable, moisture impervious membrane over the entire
surface. Applied with brush, roller or sprayer our engineered
two-pass system assures proper coverage and thickness. |
Interior
Vapor barrier:
System 17-X, with its thin film properties, dry-to-the-touch
feel and low perm rating is perfect for use as an interior
vapor barrier. Much easier to use than poly film, to
meet current building codes or when exterior insulation
is used. |
Capillary
Block:
The plastic resins in System 17-X seal footings, preventing
capillary action and reducing moisture transmission in
basement walls**. Dries smooth and won't foul chalk lines. |
| Product
Specifications: |
Color: |
Masonry
Grey (gloss) |
| Coverage: |
50
sq. feet per gallon |
| Formulation: |
Recycled
Plastic resin - aromatic emulsion |
| Application
methods: |
Spray,
brush or roll |
VOC
Compliant Precaution: Use in well ventilated area, protective
eye wear, clothing and a 3M organic cartridge respirator
or equal should be used. System 17-X may be brushed,
rolled or sprayed
* Recycled content will vary with availability in the
market place
** To be effective a capillary break must be used above
the drain line or water table level. |
| Additional
Features: |
-
is environmentally friendly, Once cured it will not leach
into soil.
- contains U.V. inhibitors, preventing it from breaking
down in sunlight.
- is made of plastic resin with no emulsifiers; therefore,
it is unaffected by soil bacteria.
- is unlike asphalt and will not dry out and crack with
age.
- is an improved dampproofing product developed by specialists
in the field of plastics and paints.
- Custom colors available*. (* 250 gallon minimum) |
|
 |
|
| System
17-PMA Waterproofing |
System
17 PMA is a cost effective, water-based, polymer-modified
asphalt waterproofing material with excellent elastomeric
properties. It is engineered to meet or exceed the performance
properties of the best polymer modified asphalt coatings.
System 17 PMA is designed and recommended for use below
grade on exterior foundation walls. This coating was
developed for spray application. It provides a tough,
durable finish which can bridge shrinkage cracks. System
17 PMA maintains its outstanding properties when exposed
to chemicals commonly found in soils. |
| |
|
|
|
| Professional® Products |
| Professional
Products of Kansas manufactures three waterproofing formulations
that provide superior protection for all types of porous,
above grade building materials. When used as an Anti-Graffitiant,PROFESSIONAL¨ Water
Sealant is a double duty protectant which establishes
an impenetrable barrier against water and graffiti. Surfaces
treated with PROFESSIONAL¨ Water Sealant & Anti-Graffitiant
enable the easy removal of paint when using PROFESSIONAL¨ Phase
II Cleaner. |
| |
|
|
|
|
